![]() Mpls ldp password option 2 for 99 DEFAULTMD5 Message-digest-key 1 md5 encrypted 0478282F2A Interface GigabitEthernet0/0/0/0.110 l2transport Interface GigabitEthernet0/0/0/0.100 l2transport Vty-pool default 0 99 line-template TELNET Telnet vrf default ipv4 server max-servers 10 In that case I'm getting a slitely different error: AToM Dynamic with not supported AC I also tried interworking scenario between FrameRelay on IOS and Ethernet VLAN on XRv. I've tried to configure it either with another XRv or with IOS-based router. Status code: 0圆 (AC Down) in Notification message (router alert label) (router alert label) (LSP ping verification) (LSP ping verification) Interface GigabitEthernet0/0/0/1.2 GigabitEthernet0/0/0/2.2 PW type Ethernet, control word disabled, interworking none PW: neighbor 10.2.2.2, PW ID 101, state is down ( all ready ) Group AC2AC_1, XC EoMPLS, state is down Interworking noneĪC: GigabitEthernet0/0/0/1.2, state is down RP/0/0/CPU0:PE1#show l2vpn xconnect detail Group Name ST Description ST Description STĪC2AC_1 EoMPLS DN Gi0/0/0/1.2 DN 10.2.2.2 101 DN SB = Standby, SR = Standby Ready, (PP) = Partially Programmed Legend: ST = State, UP = Up, DN = Down, AD = Admin Down, UR = Unresolved, ![]() ![]() ![]() But when I try to configure a Layer 2 EoMPLS VPN over a pseudowire I get the following error:Įrror: AToM Dynamic with mismatched AC config I have configured Layer 3 VPN's and layer 2 Local E-Line VPN's (AC's on same PE) between the PEs with no problem. I have a simple topology of two PE routers connected to a P router, all running XRv. ![]() I'm running IOS XRv in VMware Workstation. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |